If you have to unplug one appliance in order to plug in another one because you only have a single socket, or if you have to use an adaptor plug so that you can have both appliances plugged in at the same time, you can easily change a single socket to a double. Multiple sockets are excellent: not only do they look tidier but they are also safer. Examine your sockets carefully: if you find any cracked or broken faceplates - often caused by vacuum cleaners running into them or furniture knocking them in a house move - they should be replaced. Replacing a damaged socket with a new similar one is very straightforward.
While any style will fit a flush-mounted box on a surface-mounted socket - the ones most likely to be damaged - check the replacement carefully because the faceplate may have squared corners, which won't fit exactly onto a round cornered pattress, and vice versa. In such a case it's a good idea to buy a new one, with a matching pattress as well.
You should also think about replacing unswitched sockets for switched ones: this can be done without having to alter any wiring or fixing. Switched sockets have an On/Off switch - and sometimes a neon indicator light - which give added protection as appliances such as TVs, radios and table lamps can be switched off 'at the wall' at night or when not in use.
In a straightforward replacement of 'like-for-like' single sockets, first switch off the power at the consumer unit and isolate the supply to the circuit by removing the appropriate fuse. Unscrew the fixing screws on the faceplate and pull it gently out of the box. Loosen the terminals and free the conductors. Make sure everything is in order inside the pattress, and then connect the conductors to the terminals of the new socket. Refit the faceplate, using the original screws if the new ones supplied don't match the thread in the pattress.
Favourites (IE)
Print This
Email This
