Keep the tiles in their packs in a warm atmosphere, and only open the pack immediately before laying.
Shuffle each pack of tiles to blend the various differences there might be in the shade of each tile.
Where tiles are being laid with floor-tile adhesive, spread sufficient adhesive for the first tile, allowing about 10mm extra at each edge. After that, spread about one square metre at a time before laying further tiles. Use a V-notched spreader to apply the adhesive.
Any adhesive that comes up between the edges of the tiles should be wiped away immediately with a cloth dampened with either white spirit or water, according to the manufacturer's directions.
Check to see if you need to apply a coat of floor seal when all the tiles have been laid. Often the tiles are supplied with just one coat of sealer applied - a second may be needed to seal and waterproof the joints.
Previous
